Nintendo 64 Transfer Pak Teardown

ID: 169181

Description: Teardown of a Nintendo 64 Transfer Pak. Useful...

Steps:

  1. On the side where you can enter the gameboy cartridges remove the 4 screws ( These are Y screw, you can use a Y 2.0 or 2.3 head). The top cover should come of after.
    2. Step image
  2. Pull back the 2 small plastic levers carefully. After you can eject the ribbon cable and remove the board.
    3. Step image
  3. After the board is removed you can access the bracket that holds down the connector attached to the ribbon cable. You can remove this by unscrewing the screw on the bracket using a PH0 head
    4. Step image
  4. On the removed top cover from step 1 remove the 2 screw as shown with a PH0 head.
    5. Step image
  5. List of all the parts separately.
    6. Step image
Back