Petlibro Granary WIFI Feeder Technique

ID: 169198

Description: If you are being faced with the outlet blocked...

Steps:

  1. Take machine apart and remove all visible screws. You need a skinny, long screwdriver for this.
    2. Step image
  2. The infrared sensor has an emitting diode and a receiver. note the receiver on the right side. These are the wires we will clip and attach to each other.
    3. Step image
  3. Clip both wires leading to the receiver (green/red) and splice these together. This will bypass the infrared sensor.
    4. Step image
  4. Validate that warning light is gone and device is functional before screwing everything together. We are done.
    5. Step image
Back