Pokémon™ GO Plus+ Faceplate Removal
ID: 169236
Description:
Steps:
- Flanking both sides of the charging port are J00 Screws. Remove these.
- These screws go into plastic, so when re-assembling the device, be very careful not to over tighten them.
- These two screws are identical to each other, but differ from the screws within the device, keep them separate from any screws you remove from within the device.
- When looking at the front of the device, with the charging point at the bottom the device has a hinge clip and wires on the top right.
- While opening, be extremely careful not to damage the fragile cables and connection between the main body and the faceplate.
- With a fingernail or some kind of slim pry tool, gently lift from the bottom left corner.
- There is adhesive that is holding the faceplate on, If you have difficulty pulling it off, use a plastic spudger by inserting it in on the bottom left then slowly hinge the device open while applying pressure to the adhesive pad to loosen it.
