Quigg MD 17560 Vacuum Cleaner Battery Replacement

ID: 169288

Description: This guide shows how to replace the battery in...

Steps:

  1. Photo 1: with a cutter, cut the label along the dividing line of the two sides of the case.
  2. Photo 2: Using a No. 2 Phillips screwdriver, remove the six screws. (red arrows)
  3. Photo 3: Seperate the two halves.
    4. Step image Step image Step image
  4. Photo 1: Remove the motor housing, the small PCB with the charging connector and the battery. Also remove the electronic parts of the on/off switch from the case.
  5. Photo 2: The two parts of the case and the small blue and transparent plastic parts can be cleaned using dish washing liquid.
  6. Photo 3: Remove the black plastic cover from the impeller by pulling on it to clean the impeller with air and/or a brush.
    7. Step image Step image Step image
  7. Photo 7: The battery is a 'pack' made up of two 18650 3.7 V. batteries with a balancing wire (the yellow wire connected to the motor's PCB).
  8. More details about Battery-replacement in this extra guide.
    9. Step image
Back