Moulinex Optitouch hand blender foot disassembly

ID: 169334

Description: This guide shows how to disassemble the foot of...

Steps:

1. Insert the spudger between the cover and the blender body.
2. Pry up to release the left plastic snap fit.

3. Repeat the same procedure on the other side. The rear of the cover should be open.

4. Pry up to release the final snap fit. The cover should come off.

5. Unscrew the top screw.

6. Insert the spudger from the top and slide it to the indicated area.
7. Pry up to release the plastic snap fit.
8. Repeat the process on the other side.

9. The blender is open!