Gel Blaster SURGE Teardown

ID: 169414

Description: Guide: How to Disassemble Gel Blaster Surge The...

Steps:

  1. Remove Easily Detachable Parts
  2. Remove all parts: hopper, barrel, and green thing.
    3. Step image
  3. Removing the Hopper
  4. Removing the Hopper Locate the hopper on top of your Gel Blaster Surge. Push back on the mechanism and gently lift the hopper away from the blaster.
    5. Step image
  5. Detaching the Barrel
  6. Use the included tool to twist the barrel to allow it to be unlocked and be removed from the blaster.
    7. Step image
  7. Taking Off the Green Thing
  8. You kind of just pull on it :3
  9. Note: Keep track of small parts, and consider using a clean workspace to prevent losing any components
    10. Step image
  10. Identifying Screws
  11. Refer to the top view picture of your Gel Blaster Surge to locate the 11 screws marked with circles. Using an Philips screwdriver, carefully unscrew each of these 11 screws.
  12. Note: screws are different sizes, Keep track of each one.
    13. Step image
  13. Removing the Cover
  14. Once the screws are removed, gently lift, exposing the internal components of your Gel Blaster Surge.
    15. Step image
  15. Exploring the Inside
  16. By completing these steps, you have successfully disassembled your Gel Blaster Surge to access most of the internal components.
  17. Refer to the inside diagram to identify the various components and wires. Take note of the wiring layout and connections.
  18. If necessary, disconnect wires according to the diagram. Exercise caution and ensure you remember the connections for reassembly.
  19. Caution: Proceed with the disassembly at your own risk, and be aware of any potential warranty implications.
    20. Step image
Back