Clean Lookah 710 Wax Coils

ID: 169456

Description: Do you own a Lookah wax vape, The Swordfish,...

Steps:

1. Remove the coil: Take the coil out of your device.
2. The coils will unscrew counter clockwise.

3. Wipe off excess: Use a Q-tip and a little isopropyl to wipe off any excess wax inside the coil. Wipe around the walls and mop up any excess wax. Use a tissue and a little isopropyl to wipe down the outside of the coil.

4. Soak it: Place the coil in a bowl of cleaning alcohol (90% Isopropyl alcohol) for 30 minutes.

5. Wipe outside: Remove the coil from the alcohol. Wipe off any alcohol around the outside of the coil. Wipe inside: Use a Q-tip and clean the inside of the coil gently. Don't press down on the quartz plate, which could damage it.

6. Let it dry: Let the coil dry completely. This could take a few hours.

7. Heat the Coil: Screw the coil back onto the Lookah vape, turn on the vape (5 clicks). Set the voltage to the highest setting. Then heat the coil 3 or 4 times. This will burn off the excess residue from the coil