Abu Garcia Black Max Spool Replacement

ID: 169590

Description: In this guide, we will be replacing the spool...

Steps:

1. Make sure you take off all the line on the reels spool.

2. Take the black pin and apply pressure, pushing the pin to the left until it cannot go further.
3. On the right side of the reel, pull the side panel towards you until it pops up toward you.

4. Make sure you are still holding the pin to the left.
5. Slowly pull the side panel to the right until it comes off completely.

6. Grab the spool with your fingers, and gently pull out the spool from the reel.
7. Grab your replacement spool and have it ready for the next step.

8. Take your replacement spool and put the spool back inside the reel, the same way you pulled out the old spool.

9. Make sure that there are no spaces in the left and right sides of the spool once the new spool is in.

10. Pull the pin to the left again.
11. Place the black side panel back onto the reel.
12. Once the black side panel is back on, apply downward pressure, pushing the black side panel back, until it clicks into place.

13. You have now done a complete spool replacement on the Abu Garcia Black Max baitcasting reel.
14. When you decide, you can now put the line back onto the spool.