Noma Pedestal Fan Blade Replacement

ID: 169640

Description: A malfunctioning fan can be a frustrating...

Steps:

1. Undo the clips on the outer edge of the fan.
2. Make sure the fan is disconnected from the power source before starting.

3. Gently remove the front piece by pulling it towards the bottom.
4. Don't pull too hard to avoid damaging the clips on the fan.

5. Turn the cap clockwise and remove it.

6. Lightly pull the faulty blade towards you.
7. Be careful while pulling to not injure yourself.

8. Insert the new fan blade onto the screw .
9. Make sure it's pushed all the way back.

10. Place the cap on the screw and tighten it by turning counterclockwise.

11. After placing the front piece back on, fasten the clips again.
12. Make sure you align the piece to fit perfectly on the top.