Framework Laptop 16" Touchpad Spacers Replacement

ID: 169751

Description: Use this guide to replace one or both touchpad...

Steps:

1. Unplug all cables and fully shut down your laptop.
2. If your repair requires a spudger, a T5 Torx, or a Phillips screwdriver, you can use the included Framework screwdriver. Whichever works best for you!

3. Use your fingernail to pull out the two Input Module latches and unlock them.
4. The latch will show red if it's unlocked.

5. Use your fingers to slide the touchpad spacer toward the bottom edge of the laptop and unclip it.
6. If you're having trouble, check if the corresponding Input Module latch is properly unlocked.
7. Lift the touchpad spacer off the laptop and remove it.

8. Repeat the same procedure for the other touchpad spacer.