Touchpad with Spacers Removal

ID: 169754

Description: Prereq for removing the touchpad after removing...

Steps:

1. Unplug all cables and fully shut down your laptop.
2. If your repair requires a spudger, a T5 Torx, or a Phillips screwdriver, you can use the included Framework screwdriver. Whichever works best for you!

3. Use your fingers to slide the touchpad spacer toward the bottom edge of the laptop and unclip it.
4. If you're having trouble, check if the corresponding Input Module latch is properly unlocked.
5. Lift the touchpad spacer off the laptop and remove it.

6. Repeat the same procedure for the other touchpad spacer.

7. Use your fingers to slide the touchpad toward the bottom edge of the laptop and disconnect it.
8. If you're having trouble, check if the Input Module latches are properly unlocked.
9. Lift the touchpad and remove it.
10. During reassembly, perform the following:
11. Place the touchpad flat on its cutout so its clips are properly aligned.
12. Press the touchpad down and slide it into place so it lines up evenly with the bottom edge of the laptop.