Lenovo V15-ADA RAM Replacement

ID: 170562

Description: This guide shows how to access and safely...

Steps:

1. Remove the 10 marked screws using a Phillips #1 screwdriver from the back plate.
2. M2.5 × 7 mm, Phillips-head (6) (RED circles)
3. M2.5 × 4 mm, Phillips-head (4) (ORANGE circles)
4. The red circles show the longer screws, and the orange circles show the shorter screws.
5. Keep your screws organized. They’re different lengths and must go back in their original positions.

6. After removing all ten screws, use a plastic spudger to separate the bottom cover from the laptop.
7. Gently slide the tool around the edges until the clips begin to release.
8. Once all the clips are loose, lift the cover off and set it aside.
9. The Wi-Fi card is located near one corner of the motherboard. It has two antenna wires connected to it (one black and one gray).

10. Push the clamps holding the RAM card in place back.

11. Lift out RAM card.

12. Pull RAM card out.

13. After completing steps 5-7, the RAM is successfully removed.