Whirlpool Refrigerator - WRS588FIHB Control Board Replacement

ID: 170963

Description:

Steps:

1. Before you begin your repair, perform the following:
2. Turn off your main water supply
3. Unplug your device

4. The dispenser panel screws are located under the dispenser as if you're looking up into the dispenser tube (where the ice cubes and water come out).
5. Remove the screw(s) securing the two dispenser panels.

6. Pull the dispenser panels straight down to separate them from the chassis.
7. Remove the dispenser panels.

8. Remove the screw(s) securing the control board.

9. Tilt the bottom of the control board away from the chassis to release its clips.
10. Pull straight down to separate the control board enough to access its connectors.

11. Disconnect the connectors attached to the control board.

12. Remove the control board.