PDP Rematch Advanced Back Shell Replacement

ID: 170988

Description: The back shell of your PDP Rematch Advanced...

Steps:

1. Orient the controller so the back side is facing you.
2. Use a Phillips #000 screwdriver to remove the seven 9 mm screws that secure the back shell.

3. Pull apart the controller's front and back shells with moderate force.
4. Orient the controller so that the front shell is facing the floor to prevent the face buttons from falling out.

5. Twist the thumbstick to remove it from the motherboard. Repeat this step if both thumbsticks need to be replaced.

6. Grab the motor and pull away from the back shell. Repeat for both motors.

7. Use a Phillips #00 Screwdriver to remove the two 5mm screws from the motherboard.

8. Remove the motherboard from the back shell using moderate force.