2013-2018 Jeep Wrangler (JK) Headlight Replacement

ID: 170996

Description: If you find that your headlight bulb isn't...

Steps:

1. Ensure the car and headlights are turned off.
2. Open the hood of your car.

3. Locate the headlight connector. It's a plastic piece attached to the back of the headlight bulb.

4. Carefully pull the headlight out from its socket. Hold the base of the bulb and gently pull straight back.

5. Unplug the old headlight from the connector. It should come off easily by pulling it away from the connector.

6. Place a new headlight into the connector where you removed the old one. Make sure it's properly aligned.

7. Insert the new headlight back into the headlight socket. Push it in until it's snug and secure.

8. Check to see if the headlight works. Turn on your car and headlights to test it.