MSI Force GC30 V2 Battery Replacement

ID: 171070

Description: In this guide we will be replacing the battery...

Steps:

  1. Puncture the sticker where indicated using a screwdriver, then remove the 9.1 mm-long Phillips screw.
  2. Remove the six 9.2 mm-long Phillips #0 screws.
    3. Step image
  3. Insert an opening pick in the gap between the front and rear case.
  4. Slide the pick around the perimeter of the controller while prying until it fully releases.
    5. Step image Step image Step image
  5. Use tweezers to grip the white battery connector.
  6. Pull the battery connector directly out of its port.
  7. Do not pull on the wires.
    8. Step image
  8. The battery is secured to the motherboard with a mild adhesive. If necessary, apply a small amount of high-concentration isopropyl alcohol beneath the battery to loosen the adhesive.
  9. Pry carefully around the battery until it fully releases.
  10. Take care not to puncture or bend the battery.
  11. Remove the battery.
    12. Step image
Back