Marshall Stanmore II Rear Panel Replacement

ID: 171637

Description: This prerequisite guide is intended to...

Steps:

1. Turn off the device and unplug the cable from the wall and the speaker.
2. Lay the speaker with the back panel facing up on a flat, stable work surface.

3. Use a Phillips #2 screwdriver to remove the ten 20.5 mm screws that secure the rear panel to the chassis.

4. Carefully lift the rear panel and let it rest on an object, like a stack of books, to avoid straining the cables.
5. Do not attempt to fully remove the panel, as this will damage the connections inside.