ZCWA BR151 Velcro Replacement

ID: 171830

Description: If you are having problems with the velcro on...

Steps:

1. Turn off the device.
2. Flip the device over to access the bottom panel.
3. Remove the cloth mop covering by lifting it from the velcro on the plastic mop attachment.
4. Remove the plastic mop attachment by placing your fingers underneath and prying it up.

5. Use a Jimmy to get underneath the velcro until you are able to push it up enough to grab.

6. Use tweezers to peel off the rest of the velcro.
7. If necessary, use the spudger to remove more of the adhesive beneath the velcro.

8. You will need four velcro strips. Cut out two, 1-inch long strips of velcro.
9. Cut an additional two, 3-inch long strips.
10. If your velcro strips already have an adhesive back, simply attach them to the top of the mop bracket.
11. If you are using a hot glue gun to attach your velcro, place a small section of glue where you want the velcro to go, then carefully press your piece down.