How to Replace Magliner Hand Truck Wheels

ID: 171858

Description: If your Magliner hand truck struggles to...

Steps:

1. Straighten the bottom of the cotter pin with the pliers to slide out the cotter pin.

2. Remove the stainless steel washer(s) before pulling out the wheel(s) from the spindle.

3. Pull the wheel in the opposite direction and slide out the old wheel(s).

4. Insert the new wheel into the wheel spindle.
5. There should be about half an inch left of the wheel spindle.

6. Replace the old washer(s) and add a new washer(s) on top of the wheel.

7. Replace the old cotter pin with a new cotter pin and slide it back into the hole at the edge of the wheel spindle.

8. Spread the right end of the new cotter pin(s) slightly outwards with the pliers.
9. This will create almost an L shape and secure the cotter pin in place.