Ridgid R350RHE 2012 Workpiece Contact Replacement

ID: 171973

Description: The Work Piece Contact Assembly is critical to...

Steps:

1. Remove the single 25 mm hex screw that secures the workpiece contact cover with a 5/32" Allen wrench.
2. Remove the single 14 mm hex screw that secures the magazine to the lower handle with a 5/32" Allen wrench

3. Remove the work piece contact cover by pulling it perpendicular to the nail gun.

4. Remove the magazine by pulling it perpendicular to the device.
5. Pulling it perpendicular will ensure no other parts fall out that are unaccounted for.

6. Release the depth adjustment knob by rotating it counterclockwise.
7. Remove the workpiece contact by pulling it parallel to the device.