PowerA Spectra Infinity Enhanced Joysticks Replacement

ID: 172072

Description: Use this guide to replace/remove the joysticks...

Steps:

1. Flip the controller so the back is facing up.

2. Remove the eight 10 mm screws from the back of the controller using a Phillips #0 screwdriver.

3. Unlock the trigger locks before removing the backplate.
4. This will make taking the plate off easier.
5. Use your fingers and carefully remove the backplate.

6. Remove the two 10 mm screws connecting the motherboard to the faceplate using a Phillips #0 screwdriver.

7. Use your hand to separate the motherboard from the face plate.

8. Take the motherboard and place it with the joysticks facing upward.

9. Use your hand to carefully remove the joysticks from the motherboard.