Logitech Gamepad F310 Case Replacement

ID: 172081

Description: Use this guide to replace a damaged or cracked...

Steps:

1. Use a Phillips #1 screwdriver to remove all seven 3 mm screws that secure the rear case.

2. Press along the seams of the controller and gently pull the front and rear case apart.
3. If necessary, use an opening tool to help pry the front and rear case apart.
4. Make sure to open the controller with the front facing down so that the buttons do not fall out.

5. Separate the front and rear case.
6. There are two side panels on the controller that come apart as well. When putting them back together, they slot into place on the sides of the controller.

7. Use a Phillips #1 screwdriver to remove:
8. Four 3 mm screws
9. One 5 mm screw
10. Remove the central silver screw last.
11. Gently lift the motherboard off of the back case and slide the cord out of the slot on top.