Shark Navigator Lift-Away Zero-M Roller Brush Replacement

ID: 172088

Description: A roller brush aims to agitate carpets and...

Steps:

1. Use any object with an edge to twist the three locks counterclockwise to the "unlocked" position.

2. Use a Torx TR6 screwdriver to remove all ten 10 mm screws.
3. These are security Torx screws.

4. Remove the two small power nozzle wheels.
5. Use a Torx TR6 screwdriver to remove the 10mm center screw.

6. Use a Torx TR6 screwdriver to remove the two 10 mm screws that were hidden by the power nozzle wheels.

7. Lift the clear plastic brush roller housing up and off of the unit.

8. Use a Torx TR6 screwdriver to remove the two 10 mm screws that secure the belt.
9. Remove the belt.

10. Lift the roller brush directly up and out of the vacuum housing.