Opening Braun 4191 Immersion Blender

ID: 173293

Description: We tried to open this at the Repair Cafe. We...

Steps:

1. First, remove the small inner clip with force.
2. Then, carefully remove the transparent disc. This is very difficult.
3. Next, remove the black disc. There are clips here that can be removed via small holes. (this is difficult)
4. Now the power cable can be removed. It is simply plugged in.
5. The next steps are NOT non-destructive.
6. The upper part of the blender is attached to the lower part by the ring marked in pink. https://www.youtube.com/watch?v=DBvnGFyS...
7. You can try to loosen the glue with something flat and pointy, such as a spudger. (see second image.)
8. The upper part can now be removed, and you can access the circuit board!