Nespresso Krups XN 304 Coffee Machine Assembly.

ID: 173379

Description: This Guide covers only Reassembly of the...

Steps:

1. Once the repair is completed as we saw in Guide 2 and it has been verified that it works, we can proceed to reassemble the machine.

2. We replace the casing on the right side: with the capsule press in the closed position, we fit first the upper latches and next the part of the tank inlet.

3. Looking to see the two upper latches are positioned, we apply pressure to secure them. The part with the buttons usually causes some problems. You have to position them from the outside with a flat screwdriver.

4. As the two casings fit together, we apply slight pressure.

5. We put the mains input cord in its opening and place the bottom plate (if your model has it) some models do not. In this step I have inserted the cable, but it is preferable to do it after step 9.

6. We place the cable clip.

7. We place the upper support cover of the water tank, ATTENTION THERE IS A TRICK.
8. It must be fitted first on the left side where it has two slats, (if you look closely, the other side does not have them) if you do not fit them first, the two plastic slats on the lid will bend and break.
9. The cover in photo 3, due to an incorrect first assembly, as you can see the plastic was damaged.

10. Detail of the two slats mentioned in the previous step, which if assembled incorrectly will bend and break.

11. The cord is inserted at the bottom, this was already shown in step 5, but it is better to perform this action as step 9.

12. We will replace the side covers, remember that in disassembly guide 1, marked with a marker where each cover went.
13. If we 'clamp' the covers with our fingers, it latches together much more easily.

14. Positioned and latched:. the two covers. The four screws for each of them are replaced.

15. Assembly of the cover on the other side.
16. Insertion of the four Torx screws.

17. The handle of the capsule press is replaced and the two screws are inserted.

18. Fitting of the inner guide of the water "pourer".
19. END of the Guide.
20. Other Guides in this series: Nespresso KRUPS XN 304 Coffee Machine