How to Remove Cutting Board Scratches

ID: 173731

Description: Repairing the scratches on a wooden cutting...

Steps:

1. Thoroughly wash the cutting board with warm water and gentle dish soap.
2. Rinse the cutting board to make sure all the soap is removed.

3. Pat the cutting board dry with a towel.
4. Allow the cutting board to completely air dry.

5. Use a fine grit sandpaper (220-grit) and gently sand the scratched sections of the board.
6. Use even pressure until the scratches disappear.

7. Remove any dust or residue using a damp towel.
8. Make sure the cutting board is completely clean and dry before moving on to the next step.

9. Pour a generous amount of food-safe oil onto the surface of the board.
10. The amount will vary depending on the size of the board.
11. Allow the oil to soak into the cutting board overnight.
12. Wipe off any excess oil.
13. If there are still scratches visible on the cutting board, repeat all steps if necessary.