EasySMX ESM-9100 Bottom Case Replacement

ID: 174229

Description: Follow this guide if you need to remove the...

Steps:

1. Place the controller face down on a solid surface.
2. Use a Phillips #00 screwdriver to remove the seven 10 mm screws from the back cover.
3. The order does not matter.

4. Use the iFixit opening tool to pry off the back cover and remove it to reveal the internal components.
5. Place the cover off to the side, then grab the circuit board and gently remove it from the front cover.
6. Be careful when removing the back cover, the components in this controller are loosely attached and can fall out easily.