Add Hydraulic Fluid - BallyPal

ID: 175615

Description: To add hydraulic fluid into the tank for the...

Steps:

  1. To access the hydraulic tanks, use an Allen wrench to remove the two (2) screws on the main cover.
  2. Hydraulic Fluid should not be below the MIN fluid level line.
  3. Using a funnel, add #46 hydraulic fluid to the tank.
  4. Do not exceed the MAX fluid level line.
  5. Use a clean rag to wipe off any spilled or excess fluid.
  6. Insert and tighten screws to secure the main cover.
Back