Smart Soldering Iron Cap Disassembly

ID: 177856

Description: Prerequisite-only guide for Smart Soldering...

Steps:

1. Use a Phillips screwdriver to remove the 8.0 mm‑long screw at the bottom of the opening of the soldering iron cap that secures the cap tip and clip spring to the cap.
2. You will need a long-shaft screwdriver to be able to reach the screw inside of the soldering iron cap.

3. Pull upward on the cap tip to remove it from the cap.
4. During reassembly, fit the iron prongs at the top of the cap into the holes at the bottom interior of the cap tip.

5. Pull up from the bottom of the cap spring clip.
6. Pull the ends of the spring clip straight out through the holes in the cap to remove it.