Portable Power Station Internals Removal

ID: 177905

Description: Prerequisite‑only guide for removing the...

Steps:

  1. Place your fingers on the rear cover screw holes and push the chassis slightly out of the enclosure.
    2. Step image Step image
  2. Slide the chassis fully out of the enclosure, making sure the battery connector doesn't get snagged.
  3. During reassembly:
  4. Make sure the battery is disconnected before sliding the chassis into the enclosure. Otherwise, you'll damage the battery connector.
  5. Insert the battery connector side of the chassis into the end of the enclosure closest to the kickstand and slide it into place.
    6. Step image Step image Step image
Back