Logitech K480 Rubber Dome Sheet Replacement

ID: 178141

Description: This guide will show you how to replace the...

Steps:

1. Flip the keyboard over.

2. Remove the four rubber feet with a spudger.

3. Slide open battery panel.
4. Remove the batteries.

5. Remove the three 4 mm screws under the rubber feet using a Phillips #0 screwdriver.

6. Remove the two 4 mm screws from beneath the battery cover using a Phillips #0 screwdriver.

7. Starting by the dial, slide the spudger between the front and back panels until it lifts and snaps.
8. Slide a blue pick in to keep the pieces apart while you work on other areas.
9. Continue prying along the edges until you have enough opened that you can pull both pieces apart gently with your hands.
10. The loud snaps are the clips that hold the pieces together. They're not breaking and you do not need to be alarmed.

11. Remove the eight 3 mm screws using a Phillips #00 screwdriver
12. Remove the five 2 mm silver screws from the metal plate using a Phillips #00 screwdriver.
13. Remove the single 4 mm black screw by the motherboard using a Phillips #00 screwdriver.

14. Lift up and remove the metal plate.

15. Remove the two black 4 mm screws from the Bluetooth motherboard with a Phillips #00 screwdriver.

16. Lift the flex circuit and move it aside.

17. Lift the rubber dome sheet and remove it.