PDP Victrix Gambit Prime Wired Tournament Controller Outer Case Replacement

ID: 178287

Description: To clean out dust and debris from the...

Steps:

1. Insert an opening tool in the gap between the rear and front case.
2. Pry around the perimeter until the front case releases.
3. Remove the front case.

4. Remove all seven 9 mm Phillips #000 screws securing the midframe.
5. Remove the midframe.

6. Optional: With a pair of tweezers, carefully wipe down the device.
7. It is recommended to use electrical disinfectant wipes or a microfiber towel to clean any excess debris.