Top Cover Removal

ID: 178325

Description:

Steps:

  1. Place the laptop on your work surface so the top cover with the MNT logo is facing up.
  2. Use a Phillips screwdriver to remove the seven 4.8 mm‑long screws securing the top cover.
    3. Step image Step image
  3. The top cover is made of printed circuit board (PCB) material. Press gently but firmly near an edge when applying the suction handle to avoid breaking the cover.
  4. Apply a suction handle to the top cover.
  5. Use the suction handle to lift the top cover off of the laptop.
  6. Alternatively, you can use a thin prying tool to lift the cover, or tilt the laptop until the cover falls out.
  7. There's a thermal pad between the top cover and the processor that may stick to the top cover during removal.
    8. Step image Step image Step image
Back