Milwaukee 6130-33 Cut-Off Wheel Replacement

ID: 178360

Description: If your cut-off wheel is making screeching...

Steps:

1. Position the cut-off wheel so that is facing upward.
2. Remove the top flange nut by turning it counterclockwise.
3. If a disc replacement is necessary, you will find the disc located beneath the top flange nut.
4. Pull the flange upward from the spindle to remove it.

5. Press down on the detent tab to release the guard lock.
6. Remove guard from detent tab.
7. Gently wiggle when remove from left to right before pulling up.

8. Remove the 3 mm Phillips #1 screw that secures the detent tab.

9. Push down on top of detent tab, then remove detent tab by pulling upwards.

10. Remove the spring between the two top corner screws.