Amazon Echo Show 8 3rd Gen Power Board Replacement

ID: 178369

Description: Since the Amazon Echo Show 8 3rd Gen doesn't...

Steps:

1. Use a prying tool to remove the rubber foot at the bottom.
2. It is secured with adhesive and will lift off with some gentle prying.
3. Use an opening pick to remove the screw cover.

4. Use a Torx TR8 screwdriver to remove the two 2 cm screws.

5. Insert a jimmy in the gap between the display and chassis.
6. Pry around the perimeter until the back case releases.
7. Be careful as to not damage the ribbon cable on the top left area of the screen.
8. Remove the back case.

9. Use a Torx TR6 screwdriver to remove the two 5 mm screws that secure the power board.
10. Carefully lift the board without straining the ribbon cable.
11. Using an opening tool, carefully flip up the black ZIF locking flap that secures the ribbon cable.
12. Disconnect the ribbon cable.