CRKD NEO S CK24NS Button Replacement

ID: 178378

Description: If the buttons on your CRKD NEO S CK24NS...

Steps:

1. Turn the CRKD NEO S CK24NS upside down with the front-facing buttons facing downward.

2. Use a 1.5 mm Hex screwdriver to remove the eight 1.5 mm Hex screws from the back of the controller.
3. Carefully lift off the back panel and set it aside.

4. Remove the four 2.5 mm screws holding the motherboard in place using a Phillips #0 screwdriver.
5. Take out the white plastic pieces connected to the motherboard with tweezers.
6. Gently lift the motherboard and set it aside.
7. If the small red plastic piece next to the audio jack falls out, don’t worry. You can pop it back into place during reassembly.

8. Depending on the button(s) you want to replace, lift them out with a pair of tweezers and put the new buttons in.
9. Make sure the controller is facedown because the buttons will fall out.