CRKD NEO S CK24NS Thumbstick Cap Replacement

ID: 178382

Description: If the thumbstick caps on your CRKD NEO S...

Steps:

  1. Turn the CRKD NEO S CK24NS upside down with the front-facing buttons facing downward.
    2. Step image
  2. Use a 1.5 mm Hex screwdriver to remove the eight 1.5 mm Hex screws from the back of the controller.
  3. Carefully lift off the back panel and set it aside.
    4. Step image Step image Step image
  4. Remove the four 2.5 mm screws holding the motherboard in place using a Phillips #0 screwdriver.
  5. Take out the white plastic pieces connected to the motherboard with tweezers.
  6. Gently lift the motherboard and set it aside.
  7. If the small red plastic piece next to the audio jack falls out, don’t worry. You can pop it back into place during reassembly.
    8. Step image Step image Step image
  8. Flip the motherboard right-side up.
  9. Gently pull off the thumbstick caps.
    10. Step image Step image Step image
Back