Udreamer Turntable Belt Replacement

ID: 178417

Description: If your Udreamer turntable isn’t spinning...

Steps:

1. Gently pull off the retaining clip at the center of the turntable platter.
2. Put it in a safe spot to avoid losing it as you will need it for reassembly.

3. Lift the platter straight up and off the spindle to reveal the belt and motor assembly underneath.

4. Carefully stretch the old belt off the motor pulley and platter grooves.
5. Inspect the pulley and platter for debris or damage.

6. Position the new belt around the motor pulley and the inner rim of the platter.
7. Ensure the belt lies flat without twists.

8. Place the platter back onto the spindle, aligning it with the motor assembly.
9. Hold the belt in place as you lower the platter.

10. Press the retaining clip back onto the spindle to secure the platter.
11. Ensure the clip is tightly fastened to prevent the platter from wobbling during use.