Hitachi CP-X2011N Speakers Replacement

ID: 178924

Description: We are replacing the speakers on the Hitachi...

Steps:

1. Orient the projector with the underside facing up and remove all nine 11.5 mm screws with a Phillips #00 screwdriver.
2. On the outlet area on the rear of the device, remove all three 11.5 mm screws with a Phillips #00 screwdriver.
3. Carefully remove the cover using your hands.

4. Remove all four 10.47 mm screws holding the motherboard in place with a Phillips #00 screwdriver.

5. Carefully disconnect all seven ribbon cables and wire connections from the motherboard using tweezers.

6. Carefully remove the motherboard from the projector.

7. Remove all jack standoff screws to detach the ports from the cover using a Phillips #00 screwdriver.

8. Remove the motherboard.

9. Lift the speakers up and out of their housing.