PowerA Spectra Contoller Bumper Replacement

ID: 178937

Description: This guide informs you on the proper way to...

Steps:

1. Flip the controller over so the backplate is facing up.

2. Use a Phillips #2 screwdriver to remove the eight 7.8 mm screws that secure the rear case.

3. Hold the front case in one hand and pull the rear case off.

4. Remove the two 7.8 mm screws from the motherboard with a Phillips screwdriver.

5. Grasp the front plate and motherboard and slowly pull apart to access the bumpers.

6. Use angled tweezers to unclip the bumper spring from the front plate.

7. Lift up the bumper and slide off the bumper axis to remove.