CHUWI GemiBook XPro Speakers Replacement

ID: 179128

Description: The CHUWI Gemibook XPro does not feature...

Steps:

1. Peel off the black tape on the upper-right side of the motherboard.

2. Use two opening tools or your fingernails to carefully "walk" the battery connector out of its socket.

3. Unseat the speaker wires and antenna wire from their retaining hooks on the battery with a halberd spudger.

4. Use a Phillips #1 screwdriver to remove the five 4.3 mm screws that secure the battery.

5. Lift the battery up and out of the chassis.

6. Use tweezers or your fingernails to gently disconnect the speaker connector.

7. Use a Phillips #1 screwdriver to remove the four 4.2 mm screws that secure the speakers (two screws on each speaker).

8. Gently pick up and remove both speakers. Be careful not to strain the wire connecting them.