JBL Flip 6 Passive Radiators Replacement

ID: 179146

Description: If your JBL Flip 6 speaker is experiencing...

Steps:

1. Using the iFixit opening tool, pry up on the button side of the slot on the case until the clips release.

2. Now that the gap is larger, using the same tool, pry up on the other side until the clips release.

3. With all clips released, slide the case off longways.
4. You may need to spread it a bit with your hands so that the clips do not become caught on the end pieces.

5. Use a prying tool to lift up on one of the clips that holds the radiator in place.

6. After the clip has been released, insert a shim to keep the parts separated and from the clipping back together.
7. Pry on the clip on the other side to fully release the passive radiator.

8. After both clips have been detached, the passive radiator is easier to remove by hand.
9. Repeat the same steps for the passive radiator on the other side.