IFYOO ZD-V108 D-pad Replacement

ID: 179197

Description: Use this guide to replace the D-pad of the...

Steps:

1. Remove the seven 9.2 mm screws from the back of the controller using a Phillips #00 screwdriver.
2. Remove the back cover.

3. Remove the two 7.2 mm screws that connect the red daughterboard to the tan motherboard using a Phillips #00 screwdriver.

4. Carefully pull up on the motherboard until it slides off from the four black cylinders keeping it in place.

5. Remove the D-pad module on the right side of the controller.