Milwaukee 6130-33 Fan Casing Replacement

ID: 179267

Description: If you notice handling issues with the fan...

Steps:

1. Remove both 3.5 mm TR10 Torx screws from the carbon brush locks.
2. Turn over the device and perform the same process on the opposite side.

3. Remove both springs by pulling outwards from the rotor.
4. When removing, pull on the carbon casing to avoid harming both yourself and the device.

5. Using a pair of pliers, squeeze the black cord.
6. Remove by pulling the black wire attached to the brush casing.

7. Remove the four 4 mm TR20 Torx screws from the gear casing.

8. Remove the case head attached to the rotor by pulling it up and off.

9. Remove the four 3.5 mm TR10 Torx screws from the fan casing.
10. Remove the fan casing to access the inside casing.