Samsung Galaxy A11 Back Cover Replacement

ID: 180351

Description:

Steps:

1. Place the SIM eject tool in the hole of the sim tray.
2. Push until part of the SIM tray is pushed out.
3. Pull out the rest of the SIM tray.

4. Gently pry open the area of the back cover near the SIM tray using an iFixit opening pick.
5. Gently move the pick along the gap and pry open the clips holding it together.
6. If possible, use multiple picks to prevent the back cover from closing.

7. Using a hair dryer on low heat, heat the fingerprint sensor in increments of 30 seconds to loosen the surrounding adhesive.
8. Gently push the fingerprint sensor until it detaches from the back cover.
9. If needed, remove the button by prying it from the bottom of the device.