My Arcade Pocket Player Pro Teardown

ID: 180480

Description: This guide explains the process of...

Steps:

  1. Using a Phillips #0 bit, remove the screws holding in the battery covers. Then, pull down on the covers using the tabs, and remove any batteries if need be.
    2. Step image Step image
  2. Using the PH0 screwdriver, remove the screws highlighted in red, then use the iFixit opening tool to pry the yellow cover away from the back shell, to unclip them. Lift the cover out of the shell.
    3. Step image Step image Step image
  3. Using a pair of angled tweezers, remove the wriststrap and top buttons.
    4. Step image Step image Step image
  4. Unscrew the screws highlighted in red. Then, lift up the screen's ribbon cable connector, use tweezers to remove the cable, and lift out the motherboard.
    5. Step image Step image Step image
  5. Using angled tweezers, lift out the buttons, and the D-Pad membrane, then use your fingers to lift out the LCD. It is not glued to anything.
    6. Step image Step image Step image
Back