Anbernic RG35XX Rear Case Replacement

ID: 180641

Description: Use this guide to replace the rear case on an...

Steps:

  1. Remove the SD card located on the right side of the device by pushing into the SD card slot and pulling the card out.
  2. Remove the six 1.2 mm screws that secure the back case with a 2.5 Hex Bit screwdriver.
    3. Step image Step image
  3. Insert an opening tool into the MicroSD card slot and twist it clockwise to begin releasing the rear case.
  4. You'll hear "clicks" as the retaining clips release.
  5. Pry around the entire perimeter until the rear case fully releases.
  6. Remove the rear case.
    7. Step image
Back