Hori Pad Mini Controller Teardown

ID: 180702

Description: My controller's left joystick was acting...

Steps:

1. Unscrew the 6 screws from the back of the controller

2. Remove the back panel. It is not attached by anything.
3. Behold the innards of the controller.

4. Remove two more screws to disconnect the top green board from the bottom green board.

5. Notice the top and bottom boards are still connected by a soldered cable.
6. Notice the joysticks look kinda soldered on, too.

7. Realize you're not going to repair your finicky left joystick today.
8. Reverse all previous steps and screw it back together.