Marshall Uxbridge Back Panel Replacement

ID: 180737

Description:

Steps:

1. Orient your speaker so that the back is facing you.
2. Use a Phillips #2 screwdriver to remove the six 19mm screws from the back plate.
3. Use an iFixit opening pick to remove and lift the back plate to expose the connected wires.

4. Detach the white connector from inside the bottom of the back panel.
5. Detach the small red and white connectors from the motherboard on the left side of the back panel.

6. Pull the blue ribbon cables from the motherboard.
7. Remove the back panel from the speaker base.