Motorola Moto G Stylus (2021) Rear Case Replacement

ID: 180738

Description: Use this guide to replace the rear case on a...

Steps:

1. Push a SIM tray ejector into the hole.
2. Remove the SIM card and tray.

3. Before you begin, discharge the battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
4. Power off your phone and disconnect the charger and any peripheries before beginning disassembly.
5. Lay the phone face down.
6. Heat an iOpener and apply it to the rear case.
7. Alternatively, use a hair dryer to heat the rear case until it's almost too hot to touch.

8. Insert an opening tool into the seam between the rear case and chassis.
9. Once you create a gap, insert an opening pick a couple of millimeters into the gap.
10. Slide the opening pick around the entire perimeter to sever the adhesive that secures the rear case.
11. If you feel excessive resistance, reheat the problem area(s).
12. Remove the rear case.